VMP TR-60 60 Inch Roof Mount Tripod for Antenna Mast
Tripod Antenna Mast Mount holds mast up to 2.00 inch OD, includes a pitch pad kit, a universal mast clamp and has installer friendly front facing feet with the outer legs lining up at 48 inches (3 x 16) and the center leg at 24 inches from either outer leg. (Mast Not Included)
This Penetrating Mount Series from VMP is finished with a dark brown weather resistant powder coat inside and out that blends well with residential environments.This Mount as a Base can accomodate Masts up to 2 inches in Diameter. Typical rafter spacings are 16 inches center to center and pre-built trusses are 24 inches center to center. Large Mast and Antenna Loads should be additionally supported by Guy wires to reduce Wind Load leverage against the Base. And as with all items in this Product Line, Screws and Pitch Pads are included.
EZ 5-16 5 Foot Galvanized
Made in the USA!
This is a 5 Foot (60") by 1.25" OD 16 AWG Galvanized Antenna Mast (Mount Not Included)...
EZ 5-16S 5 Foot 16 AWG Swaged Antenna Mast Section
Made in the USA!
This 5 Foot (60") by 1.25" OD 16 AWG swaged end Antenna Mast tube is galvanized for weather and used to extend any 1-1/4 inch 16 gauge antenna masts by fitting the swaged end of this mast into the open end of the other mast tube, thereby extending the existing mast an additional 5 feet. Manufacturers recommend that masts heights of 10 feet and higher be guyed...
3 Star 5994 1.66 to 2 Inch O.D. Combination Satellite and Off-Air TV Antenna Mast
(28" Length) by 1.66" to 2.00 " O.D. 16 AWG Galvanized Antenna Mast (Mount Not Included)...
Tripod mounts offer fast, easy installation for one person. The legs adjust to any rafter spacing. Available in a range of sizes, tripods are shipped completely assembled with no loose parts so they can be quickly installed at your location.
Better reception, neat appearance with high quality self-supporting antenna mounts that eliminate signal distortion caused by inferior materials
Unmatched strength, durability and corrosion protection with heavy gauge,high quality, tubular steel uprights featuring the Sun-Coat process. This special triple-coating of zinc, chromate and polymer gives a smooth, shiny finish.
New Store to Open 2024
Three Star Inc.
5750 Stuart Ave.
Jacksonville, FL 32254
Your Orders are Currently being Processed and Shipped out of Richmond, VA.