ROHN H30 Foot Telescoping TV Antenna Mast
Made in the USA!
Used for Off-Air TV Antenna, Amateur (Ham) Radio, Wireless Internet Antenna, MMDS and Cell Phone Signal Booster, Emergency Dispatch and Public Utilities Installations. All aerial Telescoping push-up Masts are galvanized and come with hardware designed to support light duty aerial antennas. The unique Rohn design features interior tube flanging combined with a double crimped exterior tube to produce a stronger and more stable joint than most common mast. Each section extends deeper into the lower tubes than most designs, adding to the masts stability. Height listed describes the overall pipe length. Due to overlapping sections of pipe, the extended masts will be shorter. This Mast fully extends to about 27' Feet. The shipping dimensions are 10' feet x 4" x 4" and ships Freight Only to Commercial and Residential addresses.
Estimated Usable Extended Height is around 27 Feet.
Mast Section Dimensions are:
(1) 10'0" length x 1.25" O.D. (16 AWG)
(2) 9'10" length x 1.50" O.D. (18 AWG)
(3) 9'04" length x 1.75" O.D. (18 AWG)
Compare to Channel Master 1630, 1830 Telescopic Masts!
This Item Ships LTL Freight ONLY...
H303WAYGUY Telescopic Antenna Mast Down Guy Wire and Anchor Kit
is designed to Securely 3 way Guy at 3 levels your 30' Telescoping Mast. Works with ROHN H30 and Channel Master 1630, 1830 Telescopic Push Up Antenna Masts. Choose Guy wire gauge and Anchor size. Mast is not included...
H304WAYGUY Telescopic Antenna Mast Down Guy Wire and Anchor Kit
is designed to Securely 4 way Guy at 3 levels your ROHN H30 and Channel Master 1630, 1830 Telescopic Push Up Antenna Masts. Choose Guy wire gauge and Anchor size. Mast is not included...
3 Star Inc. EZ32A Heavy Duty Telescopic Mast Ground Mount
Made in the USA!
is designed to support and facilitate grounding for ROHN H20, H30, H40, H50 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic (Push-up) Antenna Masts. Outer dimensions are 9 x 9 inches...
EasyUp 19-B Universal Telescopic Push Up Antenna Mast Roof Base Mount
Made in the USA!
is completely assembled for Flat or Peaked Roof Mounting ROHN H40, H50 , 9H50 EASYUP TM40 , TM40U , TM50 and Channel Master 1640, 1650, 1840, 1850 Telescopic Push Up Antenna Masts up to 2-3/8 inches in DIA...
3 Star's Telescopic Mast Grounding Kit
Universal grounding kit for telescopic masts include ground rod, ground wire and grounding block...
3S-WM4 "W" Type Heavy Duty Antenna Mast 4 inch Wall Mount Bracket
Made in the USA ( Holds Masts from 1 to 1.75" in Diameter )
is designed to provide supplemental Wall Mount Support for ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up Antenna Masts or ANY TV Antenna Mast like the CM-1607, CM-1610, CM-1805, CM-1810, EZ 5-16, EZ 5-16S, 3S-5999 and 3S-5994 from 1 to 1.75 Inches in Diameter (Mast not included). Set of (2) comes with Installation Hardware. Guy Wire Support for Mast Sections 10 Feet and greater above this mount will still be required...
Read More3S-WM12W Telescopic TV Antenna Mast 12" Wall Mount Bracket
Made in the USA!
is designed for Wall Mount Support of ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up TV Antenna Masts or ANY Mast from 1.25 to 3 inches in Diameter (Mast not included). Guy Wire Support for Mast Sections above this mount will still be required...
3S-WM18W Telescopic TV Antenna Mast 18" Wall Mount Bracket
Made in the USA!
is designed for Wall Mount Support of ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up TV Antenna Masts or ANY Mast from 1.25 to 3 inches in Diameter (Mast not included). Guy Wire Support for Mast Sections above this mount will still be required...
3S-WM24W Telescopic TV Antenna Mast 24" Wall Mount Bracket
Made in the USA!
is designed for Wall Mount Support of ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up TV Antenna Masts or ANY Mast from 1.25 to 3 inches in Diameter (Mast not included). Guy Wire Support for Mast Sections above this mount will still be required...
3S-WM-30W Telescopic TV Antenna Mast 30" Single Wall Mount Bracket
Made in the USA!
is designed for Wall Mount Support of ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up TV Antenna Masts or ANY Mast from 1.25 to 3 inches in Diameter (Mast not included). Guy Wire Support for Mast Sections above this mount will still be required...
ROHN WM12D Antenna Mast 12 inch "Y" HD Wall Mount 3rd Leg Bracket
Made in the USA!
is designed to Wall Mount ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up Antenna Masts or ANY TV Antenna Mast from 1 to 2.75 Inches in Diameter (Mast not included). Set of (1) comes with Installation Hardware and Anti-Twist Feature. Guy Wire Support for Mast Sections above this mount will still be required (14 gauge steel)...
ROHN WM18D Antenna Mast 18 inch "Y" HD Wall Mount 3rd Leg Bracket
Made in the USA!
is designed to Wall Mount ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up Antenna Masts or ANY TV Antenna Mast from 1 to 2.75 Inches in Diameter (Mast not included). Set of (1) comes with Installation Hardware and Anti-Twist Feature. Guy Wire Support for Mast Sections above this mount will still be required (14 gauge steel)...
ROHN WM24D Antenna Mast 24 inch "Y" HD Wall Mount 3rd Leg Bracket
Made in the USA!
is designed to Wall Mount ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up Antenna Masts or ANY TV Antenna Mast from 1 to 2.75 Inches in Diameter (Mast not included). Set of (1) comes with Installation Hardware and Anti-Twist Feature. Guy Wire Support for Mast Sections above this mount will still be required (14 gauge steel)...
Read More
ROHN WM4 Telescopic Antenna Mast 4 inch "W" HD Wall Mount Bracket
Made in the USA!
is designed to Wall Mount ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Push Up Antenna Masts or ANY TV Antenna Mast from 1 to 2.75 Inches in Diameter (Mast not included). Set of (2) comes with Installation Hardware and Anti-Twist Feature. Guy Wire Support for Mast Sections above this mount will still be required (14 gauge steel)...
Remember those older AM/FM Portable Radios with the antenna that you extended by pulling it out? Or the Radio Antennas on older cars that would pop- out, extend and retract when you turned on the radio? This Mast isn't an Antenna, but it extends and retracts by hand in similar fashion. Available in 20', 30', 40' and 50' heights. All ROHN telescoping masts are pre-galvanized and come assembled with hardware. Erection is made by simply connecting guys and brackets to the attached unique heavy duty rolled edge guy rings and clamps, extend each section one at a time (starting with the innermost section), insert the locking cotter pins, rotating the tubes to a locked position, and tightening the clamps. Repeat the process on each successive section until fully erect.
The unique ROHN Products design features interior tube flanging combined with a double crimped exterior tube to produce a stronger and more stable joint than most common masts. This design exclusive also prevents the sections from accidentally pulling apart and allows disassembly by pulling each section out through the lower end.
Each section extends deeper in to the lower tubes than most other designs, adding still further to the stability of the structure.
H Series
This heavy duty series uses 1-1/4" 16 gauge galvanized tubing for top section. All other sections are 18 gauge.
Assembly
1. Secure base and anchors (sold separately).
2. Attach lowered mast to base.
3. Secure guy lines to the lower Guy Ring and attach to anchors. Align the mast vertically by tightening the Guy Lines.
4. Secure upper Guy Ring using the appropriate Mast Clamp to desired location on the upper Tube (see note 8 on page 10).
5. Secure appropriate length guy lines to the upper Guy Ring and let them hang.
6. Raise the upper Tube and inset the cotter pin. Make sure that the cotter pin is inside the notch in the inside tube.
7. Secure the cotter pin and tighten the mast clamp.
8. Secure appropriate length guy lines to the next highest Guy Ring, and let them hang.
9. Raise the next smallest Tube and insert the cotter pin. Make sure that the cotter pin is inside the notch in the inside tube.
10. Secure the cotter pin and tighten the mast clamp.
11. Repeat steps 8-10 until all sections have been raised and are secured.
12. Attach all hanging Guy Lines to their respective anchor. Align the mast vertically by tightening the Guy Lines. Make sure to work your way up the mast while tightening.
This Buyers Guide has will answer many questions you may have on this Product Line. For more detailed information and Specification Sheets covering many aspects of Various Parts, Accessories and Installation Scenarios... Please refer to the "Telescopic Mast" Link above !!!
Telescoping Masts are not recommended for commercial, CB or beam antenna installations.
Antenna load (top load) should not exceed an effective projected area (EPA) of 2 square feet (see your antenna specifications).
New Store to Open 2024
Three Star Inc.
5750 Stuart Ave.
Jacksonville, FL 32254
Your Orders are Currently being Processed and Shipped out of Richmond, VA.