3/8EHS-250 is 3/8" EHS Galvanized Stranded Steel Guy Wire 250 feet
Economical 250 foot length Reel, Perfect for guying down Taller ROHN 55G 65G Rohn 80 Towers in both Temporary and Permanent Scenarios, with 15,400 lbs. Breaking Strength...
3/8EHS-500 is 3/8" EHS Galvanized Stranded Steel Guy Wire 500 feet
Economical 500 foot length Reel, Perfect for guying down Taller ROHN 55G 65G Rohn 80 Towers in both Temporary and Permanent Scenarios, with 15,400 lbs. Breaking Strength...
NIPPON F-71 75 Ohm F Port TerminatorThis is plated with an anti-corrosive finish, 7/16 " nut of extremely small size for non-security Termination of Unused "F" Ports on Test Equipment and Signal Sources. Terminate open splitter ports to prevent Ingress and Egress of RF Signal...
BG2142 Big Grip Pre-formed Dead Ends for 3/16 inch EHS Galvanized Strand
For use when guying down Towers with 3/16 inch wire strand, 3,990 lbs. Breaking Strength...
ROHN 1/2TBE&E 1/2" x 9" Eye to Eye TurnbuckleFederal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Glavanized, Open Body, Working Load Limit: 2200 lbs., Ultimate Strength: 11000 lbs.Typical Use: when attaching and tensioning ROHN Tower Down Guy terminations 3/16" Strand via Pre-formed deadend an...
ROHN 5/16THH 5/16 inch Heavy Duty Open Eye Wire Rope ThimbleFor use in forming Down Guy Dead-ends with 3/16" Preformed Dead-end or 1/4" Bare Wire Strand Rope using several Cable Clamps...
ROHN 3/4TBE&J 3/4" x 12" Eye to Jaw TurnbuckleFederal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Glavanized, Open Body, Working Load Limit: 5200 lbs., Ultimate Strength: 26000 lbs.Typical Use: when attaching and tensioning ROHN Tower Down Guy terminations (1/4" Bare Strand via Cable Clamps an...
ROHN 5/8TBE&J 5/8" x 12" Eye to Jaw TurnbuckleFederal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Glavanized, Open Body, Working Load Limit: 3500 lbs., Ultimate Strength: 17500 lbs.Typical Use: when attaching and tensioning ROHN Tower Down Guy terminations (1/4" Bare Strand via Cable Clamps an...
ROHN 1/2TBE&J 1/2" x 9" Eye to Jaw TurnbuckleFederal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Glavanized, Open Body, Working Load Limit: 2200 lbs., Ultimate Strength: 11000 lbs.Typical Use: when attaching and tensioning ROHN Tower Down Guy terminations 3/16" Strand via Pre-formed deadend an...
Preformed BG2144 Big Grip Pre-formed Dead Ends for 1/4 inch EHS Galvanized Strand
For use when Guying ROHN Towers with 1/4 inch wire strand in both Temporary and Permanent Scenarios, 6,550 lbs. Breaking Strength...