3 Star Inc 7505-HANDLE Professional Ratcheting Crimp Tool
This is for the Frame ONLY! This handle set accepts die sets with a maximum width (at the point of attachment) of 0.235″. THE Standard in ratcheting crimp tools.

LMR-400 & RG-213 Interchangeable Die for standard ratcheting crimper tools 
LMR-400 & RG-213 Interchangeable Die for standard ratcheting crimper tools (.100″, .128″, & .429″ Hex Dies) Crimps most common two and three piece connectors that fit the following coax types and sizes: RG-8/U, RG-11, RG-83, RG-213/U, RG-214/U, LMR-400, and Belden 9913.

RG-58 & RG-59 Interchangeable Die for standard ratcheting crimper tools RG-58 & RG-59 Interchangeable Die for standard ratcheting crimper tools (.052″, .068″, .100″, .213″, and .255″ Hex Dies). Crimps most common two and three piece connectors that fit the following coax types and sizes: RG-6, RG-142, LMR-195, LMR-200, RG-223, RG-316, RG-400, RG-58/U, Belden 7807, RG-59/U, Belden 8214, Belden 8218, Belden 8281, RG-62, LMR-240, and RG-8X Mini 8 coaxial cable.

RG-174 & RG-58 Interchangeable Die for standard ratcheting crimper tools   RG-174 & RG-58 Interchangeable Die for standard ratcheting crimper tools (.213″, .197″, .178″, .128″, .068″, .042″ Hex Dies) Crimps most common two and three piece connectors that fit the following coax types and sizes: RG-142, LMR-110, ,RG-174, RG-178, RG-188, RG-196, Belden 8216, LMR-200, RG-316, RG-400, RG-58, and Belden 7807.

SKY 5048 Cable Tie Ty-Rap Tensioner Tool
This cable tie tool installs cable ties with ease. Use it to cinch them up without over-tightening, then cut away the excess...

3 Star SF100 Compact Satellite Signal Finder with Beeper
This Satellite Seeker is an electronic measuring instrument for perfect adjustment of satellite antenna to the respective satellite...

LTAB4030TP  Single Channel HD Video & Power Balun

If you’re installing several cameras, you'll appreciate the time savings these single channel HD Vieo & Power Balun. Instead of cutting and splicing wires and having to use wire-nuts or soldering connectors, push pin terminal with pigtails

PM Painters Mitt

Painters Mitt for painting Towers & Railing ..

3Star SKYPAD2 Non-penetrating Roof Mount Rubber Protective Mat
A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 1/8 thick Pad measures roughly 36 wide by 36 inches long, trims neatly, place underneath Frame of Non-Penetrating mount, on top of Roof surface...

 FRM-MAT Satellite Dish Non-penetrating Roof Mount Rubber Protective Mat
A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 3/32 thick Pad measures roughly 36 wide by 42 inches long, trims neatly, place underneath Frame of Non-Penetrating mount, on top of Roof surface...

3S-PAD Protective Barrier Pad for Roof Mount
A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 3/8 thick Pad is for placement underneath the Frame of Non-Penetrating mount, on top of Roof surface...

3 Star FRMPAD Protective Barrier Pad for FRM Mounts
A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 3/8 thick Pad measures roughly 18 wide by 42 inches long, includes 2 each per set, place underneath Frame of Non-Penetrating mount, on top of Roof surface...

3S GR-2 Adjustable 4-Way Pipe Mount HDG
Made in the USA!
Adjustable mount , for Antenna masts , Fits Masts up to 2-3/8" ......

EZ 43-A Adjustable 3-Way Down Guy Ring
Made in the USA!
Adjustable mount Down Guy Ring, for 3-Way guying of Antenna masts with Screw Eye Bolts to affix 620 guy wire, Fits Masts up to 1 1/4" (Mast and Wire Not Included)...

EZ-EC-PTP-2 Pole to Pole Mast Mount
Light Duty pole to pole mast mount. Attaches two pieces of tubing 3/4" OD to 2" OD Zinc plated

EZ-EC-PTP-6 Pole to Pole Large Mast Mount
Light Duty pole to pole mast mount. Attaches two pieces of tubing 1.25" OD to 4" OD Zinc plated

3S-HD-PTP-3 Pole to Pole Mast Mount
Heavy duty pole to pole mast mount. Attaches two pieces of tubing 1" OD to 2" OD. Zinc plated.

3S-HD-PTP-35 Pole to Pole Mount

Medium duty pole to pole mount. Attaches two pieces of tubing 1.50" OD to 2.00" OD. Zinc plated.

3S-HD-PTP-4 Pole to Pole Mount

Medium duty pole to pole mount. Attaches two pieces of tubing 1.25" OD to 3" OD. Zinc plated.

EZ-HD-PTP-6 Pole to Pole Mast Mount
Heavy duty pole to pole mast mount. Attaches two pieces of tubing 1.25" OD to 4.25" OD.HDG plated.

3S10-7 GPS Antenna Heavy Duty Pipe Mount
Heavy duty Antenna pipe to pipe mount. Attaches two pieces of tubing 3/4" OD to 2.00" OD. HDG.

3S10-10 GPS Antenna Heavy Duty Pipe Mount
Heavy duty Antenna pipe to pipe mount. Attaches two pieces of tubing 1-75" OD to 2.75" OD. HDG.

GPS Antenna Light Duty Pipe Mount
Heavy duty Antenna pipe to pipe mount. Attaches two pieces of tubing 1.50" OD to 3.50" OD. HDG.

GPS Antenna Heavy Duty Pipe Mount
Heavy duty Antenna pipe to pipe mount. Attaches two pieces of tubing 1.50" OD to 3.50" OD. HDG.

3S-10-25  GPS Antenna Heavy Duty Pipe Mount 2.38" to 5.00" OD
Heavy duty Antenna pipe to pipe mount. Attaches two pieces of tubing 2.38" OD to 5.00" OD. HDG.

3S-40-16  GPS Antenna Heavy Duty Pipe Mount 4" to 9" OD

Heavy duty Antenna pipe to pipe mount. Attaches two pieces of tubing 4" OD to 9" OD. HDG.

CPP-HD2 Heavy Duty Crossover Pole to Pole Pipe Clamp Kit 1.00" to 2.00" OD Pipe 

Crossover Pipe Mounting Kit for 1.00" OD to 2.00 in OD round members. Mounting Clamps are used to mount horizontal members to vertical members.  Materials are all HDG ( Hot Dipped Galvanized )

CPP-HD275 Heavy Duty Crossover Pole to Pole Pipe Clamp Kit 1.50" to 3.00" OD

Crossover Pipe Mounting Kit for 1.50" to 3.00"  OD round members. Mounting Clamps are used to mount horizontal members to vertical members.  Materials are all HDG ( Hot Dipped Galvanized )

Light Duty Small Crossover Pole to Pole Clamp

Pipe Mounting Kit for 1.75 in OD round members. Mounting Clamps are used to mount horizontal members to vertical members. Set of two.

3S-SM-CL U-Bolt with Heavy Duty Small Alligator Clamps

The Pole to Pole Mounts is designed to support most WiFi , PCS, Cellular, and TV antennas. The Pole to Pole Mounts allows you to vary the mounting pipe length and diameter, It is Pre- galvanized for corrosion protection

3S-MD-CL Heavy Duty Medium Mast Clamp and Round U Bolt

The Pole to Pole Mounts is designed to support most WiFi , PCS, Cellular, and TV antennas. The Pole to Pole Mounts allows you to vary the mounting pipe length and diameter, It is Pre- galvanized for corrosion protection

3S-SQ4  U-Bolt , Square bend 1.66” OD to 2” OD

The Pole to Pole Mounts is designed to support most WiFi , PCS, Cellular, and TV antennas. The Pole to Pole Mounts allows you to vary the mounting pipe length and diameter, It is Pre- galvanized for corrosion protection

3S-SQ4  U-Bolt , Square bend 1.66” OD to 2” OD

The Pole to Pole Mounts is designed to support most WiFi , PCS, Cellular, and TV antennas. The Pole to Pole Mounts allows you to vary the mounting pipe length and diameter, It is Pre- galvanized for corrosion protection

3S-HD-PTP-4 Pole to Pole Mount

Medium duty pole to pole mount. Attaches two pieces of tubing 1.66" OD to 3" OD. Zinc plated.

Cantilever Mount 1.66" OD

3S-PAD Protective Barrier Pad for Roof Mount
A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 3/8 thick Pad is for placement underneath the Frame of Non-Penetrating mount, on top of Roof surface...

3 Star FRMPAD Protective Barrier Pad for FRM Mounts
A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 3/8 thick Pad measures roughly 18 wide by 42 inches long, includes 2 each per set, place underneath Frame of Non-Penetrating mount, on top of Roof surface...

3 Star Inc. EZ TM-50-5U 20 Foot Telescoping Mast 5 Foot Shipping Length
Made in the USA!
5 section 16 gauge inner, 18 gauge outers, Mast collapses down to 61 inches in length that with overlapping, extended mast length is 20'-10", Used for Mounting Off-Air TV, Ham Radio, MMDS and Wireless Internet Antennas (not included)...
This Item Ships UPS Brown!...

3 Star Inc. EZ TM-20-U-95  15' Foot Telescoping Antenna Mast
Made in the USA!
5 section 16 gauge inner, 18 gauge outers, Mast collapses down to 95 inches in length that with overlapping, extended mast length is 15' , Used for Mounting Off-Air TV, Ham Radio, MMDS and Wireless Internet Antennas (not included)...
This Item Ships UPS Brown!...

3 Star Inc. EZ TM-30-U-95 21 1/2' Foot Telescoping Antenna Mast
Made in the USA!
5 section 16 gauge inner, 18 gauge outers, Mast collapses down to 95 inches in length that with overlapping, extended mast length is 21' 6" , Used for Mounting Off-Air TV, Ham Radio, MMDS and Wireless Internet Antennas (not included)...
This Item Ships UPS Brown!

3 Star Inc. EZ TM-40-U-95   Telescoping Antenna Mast
Made in the USA!
5 section 16 gauge inner, 18 gauge outers, Mast collapses down to 95 inches in length that with overlapping extended mast length is 27' 7". Used for Mounting Off-Air TV, Ham Radio, MMDS and Wireless Internet Antennas (not included)...
This Item Ships UPS Brown!...

3 Star Inc. EZ TM-50-U-95  Foot Telescoping Antenna Mast
Made in the USA!
5 section 16 gauge inner, 18 gauge outers, Mast collapses down to 95 inches in length that with overlapping, extended mast length is 33' 2" , Used for Mounting Off-Air TV, Ham Radio, MMDS and Wireless Internet Antennas (not included)...
This Item Ships UPS Brown!...

3 Star Inc. EZ TM-20 20 Foot Outdoor TV Antenna Telescopic Mast

2 section 16 gauge inner, 18 gauge outer, Mast collapses down to 10 Feet in length that with overlapping, extended mast length is 19'-3", Used for Mounting Off-Air TV, Ham Radio, MMDS and Wireless Internet Antennas (not included)...
This Item Ships LTL Freight ONLY...

3 Star Inc. EZ TM-30 30 Foot Outdoor TV Antenna Telescopic Mast
3 section 16 gauge inner, 18 gauge outers, Mast collapses down to 10 Feet in length that with overlapping, extended mast length is 28'-0", Used for Mounting Off-Air TV, Ham Radio, MMDS and Wireless Internet Antennas (not included)...
This Item Ships LTL Freight ONLY...

3 Star Inc. EZ TM-40  Outdoor TV Antenna Telescopic Mast
4 section 16 gauge inner, 18 gauge outers, Mast collapses down to 10 Feet in length that with overlapping, extended mast length is 36'-3", Used for Mounting Off-Air TV, Ham Radio, MMDS and Wireless Internet Antennas (not included)...
This Item Ships LTL Freight ONLY...

3 Star Inc. EZ TM-50 50 Foot Outdoor TV Antenna Telescopic Mast
5 section 16 gauge inner, 18 gauge outers, Mast collapses down to 10 Feet in length that with overlapping, extended mast length is 44'-0", Used for Mounting Off-Air TV, Ham Radio, MMDS and Wireless Internet Antennas (not included)...
This Item Ships LTL Freight ONLY...

EasyUp EZ 17 Economy Roof Mount
Fits masts up to 1-3/8" tubing. 18 gauge foot with an 18 gauge tube. Often called peak mount. Zinc plated. This foot is smaller than our 19 series. Made in America.

EasyUp EZ 17A Economy Roof Mount
Fits masts up to 1-7/8" tubing. 18 gauge foot with an 18 gauge tube. Often called peak mount. Zinc plated. This foot is smaller than our 19 series. Made in America.

EasyUp 19-B Universal Telescopic Push Up Antenna Mast Roof Base Mount
Made in the USA!
is completely assembled for Flat or Peaked Roof Mounting ROHN H30 and Channel Master 1630, 1830 3 Star Inc. TM 30 , TM30U Telescopic Push Up Antenna Masts up to 1-7/8 inches in DIA...