EZ 43-A Adjustable 3-Way Down Guy Ring
Made in the USA!
Adjustable mount Down Guy Ring, for 3-Way guying of Antenna masts with Screw Eye Bolts to affix 620 guy wire, Fits Masts up to 1 1/4" (Mast and Wire Not Included)...

3S GR-2 Adjustable 4-Way Pipe Mount HDG
Made in the USA!
Adjustable mount , for Antenna masts , Fits Masts up to 2-3/8" ......

EZ 50 1/4" Eye Bolt Turnbuckle for 620 Wire Down Guy Tensioning
Made in the USA!
Turnbuckle with 1/4" Screw Eye Bolts to affix 620 guy wire for tensioning down guys on Masts up to 1 1/4" (Mast and Wire Not Included)...

ROHN 3/8TBE&E 3/8" x 6" Eye to Eye Turnbuckle
Federal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Glavanized, Open Body, Working Load Limit: 1200 lbs., Ultimate Strength: 6000 lbs.
Typical Use: when attaching and tensioning ROHN Tower and Telescopic Antenna Mast Down Guy terminations (3/16" Strand via Pre-formed deadend and 5/16THH, 1/4" Bare Strand via Cable Clamps and 5/16THH, or 618/620 Bare Wire via Cable Clamps/Gripple and 1/4TH) to Equalizer Plate Anchors (Sandwich Plated like GAC305/EP25345 or GAC303/EP25343)...

ROHN 3/8TBE&J 3/8" x 6" Eye to Jaw Turnbuckle
Federal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Glavanized, Open Body, Working Load Limit: 1200 lbs., Ultimate Strength: 6000 lbs.
Typical Use: when attaching and tensioning ROHN Tower and Telescopic Antenna Mast Down Guy terminations 3/16" Strand via Pre-formed deadend and 5/16THH, 1/4" Bare Strand via Cable Clamps and 5/16THH, or 618/620 Bare Wire via Cable Clamps/Gripple and 1/4TH) to Closed Eye or Integral Equalizer Plate Anchors (like GAS4303/EZ 30 or GAC3455). Will NOT fit a GAR30 Anchor...

ROHN 1/2TBE&E 1/2" x 9" Eye to Eye Turnbuckle
Federal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Glavanized, Open Body, Working Load Limit: 2200 lbs., Ultimate Strength: 11000 lbs.
Typical Use: when attaching and tensioning ROHN Tower Down Guy terminations 3/16" Strand via Pre-formed deadend and 5/16THH, 1/4" Bare Strand via Cable Clamps and 5/16THH, 1/4" Strand via Pre-formed deadend and 3/8THH to Equalizer Plate Anchors (Sandwich Plated like GAC305/EP25345 or GAC303/EP25343)...

ROHN 1/2TBE&J 1/2" x 12" Eye to Jaw Turnbuckle
Federal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Glavanized, Open Body, Working Load Limit: 2200 lbs., Ultimate Strength: 11000 lbs.
Typical Use: when attaching and tensioning ROHN Tower Down Guy terminations 3/16" Strand via Pre-formed deadend and 5/16THH, 1/4" Bare Strand via Cable Clamps and 5/16THH, 1/4" Strand via Pre-formed deadend and 3/8THH to Closed Eye GAR30 or Integral Equalizer Plate Anchors (like GAC3455TOP or GAC5655TOP)...

ROHN 5/8TBE&E 5/8" x 12" Round Eye to Eye Turnbuckle
Round Eye Turnbuckle, Forged, Hot Dip Galvanized, Open Body, Eye to Eye, Working Load Limit: 3500 lbs., Ultimate Strength: 17500 lbs....

ROHN 5/8TBE&J 5/8" x 12" Round Eye to Jaw Turnbuckle
Round Eye Turnbuckle, Forged, Hot Dip Galvanized, Open Body, Eye to Jaw, Working Load Limit: 3500 lbs., Ultimate Strength: 17500 lbs...

ROHN 1/2X12BB J Bolt for Mounting Tower Base Plate on Concrete Pier
for inclusion in Concrete Pier Pouring. The BPH25G is drilled to use Six (6) of these 1/2 x 12 inch "J" Bolts (Seek Engineering notes in Spec. Sheets), 1/2 Inch in Diameter by 12 Inches long, suspend by template for pouring Concrete (One Bolt per Order)...

5/8X12BB J Bolt for Mounting Tower Base Plate on Concrete Pier
for inclusion in Concrete Pier Pouring. The BPH45G uses Six (6), and the 25GSSB uses Four (4) of these 5/8 x 12 inch "J" Bolts (Seek Engineering notes in Spec. Sheets), 5/8 Inch in Diameter by 12 Inches long, suspend by template for pouring Concrete (one per Order)

 

Eye Bolt Nut HG 1/4x2"WLL 500 LB
Eye Bolts are drop forged steel, machine threaded, heat treated after forging. Eye Bolts are threaded National Course before galvanizing and assembled with hex nuts tapped oversize.

 

 

5/8" Thimble Eye BoltsMultiple lengths available.

 

5/8" Angle Type Thimble Eye Bolts
Multiple lengths available.

 

5/8" Machine BoltsMultiple lengths available.

 

 

J931 3 Bolt Down Guy ClampDown Guy Clamps are rolled from carbon steel with straight parallel grooves that will not damage guy strand.

 

EZ 60A 620 Steel Antenna Mast Down Guy Wire
Made in the USA!
50 foot segment of 6 Strand, 20 Gauge Steel Antenna Mast Down Guy Wire for Light Duty Antenna Mast Guying. Comes as 50 foot Hank section. Multiple quantities ordered will come in contiguous footage up to 1000 feet...

EZ 60A 620 Steel Antenna Mast Down Guy Wire
Made in the USA!
1000 feet of 6 Strand, 20 Gauge Steel Antenna Mast Down Guy Wire for Light Duty Antenna Mast Guying. Comes as Twenty 50 foot Hank Sections in contiguous footage totaling 1000 feet...

EZ 60 620 Plastic Coated Antenna Mast Down Guy Wire
Made in the USA!
Plastic Coated, Galvanized 6 Strand, 20 Gauge Guy Wire for Light Duty Antenna Mast Guying. Comes in continuous 50 foot Hanks up to 1000 Feet. Strip Plastic off before Terminating Down Guy ends with cable clamps...

EZ 60 620 Plastic Coated Antenna Mast Down Guy Wire
Made in the USA!
500 feet of Plastic Coated, Galvanized 6 Strand, 20 Gauge Guy Wire for Light Duty Antenna Mast Guying. Comes with 10 x 50 foot hanks for a total of 500' feet. Strip Plastic off before Terminating Down Guy ends with cable clamps...

EZ 60 620 Plastic Coated Antenna Mast Down Guy Wire
Made in the USA!
1000 feet of Plastic Coated, Galvanized 6 Strand, 20 Gauge Guy Wire for Light Duty Antenna Mast Guying. Comes with 20 contiguous 50 foot hanks for a total of 1000 feet. Strip Plastic off before Terminating Down Guy ends with cable clamps...

 

618 Telescopic Antenna Mast Down Guy Wire
Made in the USA!
1000 feet comprised of twenty 50 foot Hank coils of Heavy Duty Pre-Galvanized 6 Strand, 18 AWG Guy Wire for Guying Down Telescopic Antenna Masts. Comes in Contiguous Footage totaling 1000 feet with 700 lbs. Breaking Strength...

 

Economical 120 foot length, Perfect for guying down ROHN 25G 45G 55G 65G Towers in both Temporary and Permanent Scenarios, with 3,990 lbs. Breaking Strength...

3/16EHS-175 is 3/16" EHS Galvanized Stranded Steel Guy Wire 150 feet

Economical 150 foot length, Perfect for guying down ROHN 25G 45G 55G 65G Towers in both Temporary and Permanent Scenarios, with 3,990 lbs. Breaking Strength...

3/16EHS-250 is 3/16" EHS Galvanized Stranded Steel Guy Wire 250 feet
Economical 250 foot length, Perfect for guying down ROHN 25G 45G 55G 65G Towers in both Temporary and Permanent Scenarios, with 3,990 lbs. Breaking Strength...

3/16EHS-500 is 3/16" EHS Galvanized Stranded Steel Guy Wire 500 feet
Economical 500 foot length, Perfect for guying down ROHN 25G 45G 55G 65G Towers in both Temporary and Permanent Scenarios, with 3,990 lbs. Breaking Strength...

3/16EHS-1000 is 3/16" EHS Galvanized Stranded Steel Guy Wire 1000 feet
Economical 1000 foot length Reel, Perfect for guying down ROHN 25G 45G 55G 65G Towers in both Temporary and Permanent Scenarios, with 3,990 lbs. Breaking Strength...

3/16EHS-5000 is 3/16" EHS Galvanized Stranded Steel Guy Wire 5000 feet
Economical 5000 foot length Reel, Perfect for guying down ROHN 25G 45G 55G 65G Towers in both Temporary and Permanent Scenarios, with 3,990 lbs. Breaking Strength...

1/4EHS-250 is 1/4" EHS Galvanized Stranded Steel Guy Wire 250 feet
Economical 250 foot length, Perfect for guying down ROHN 25G 45G 55G 65G Towers in both Temporary and Permanent Scenarios, with 6,000 lbs. Breaking Strength...

1/4EHS-500 is 1/4" EHS Galvanized Stranded Steel Guy Wire 500 feet
Economical 500 foot length, Perfect for guying down Taller ROHN 25G 45G 55G 65G Towers in both Temporary and Permanent Scenarios, with 6,000 lbs. Breaking Strength...

1/4EHS-1000 is 1/4" EHS Galvanized Stranded Steel Guy Wire 1000 feet
Economical 1000 foot length Reel, Perfect for guying down Taller ROHN 25G 45G 55G 65G Towers in both Temporary and Permanent Scenarios, with 6,000 lbs. Breaking Strength...

5/16EHS-250 is 5/16" EHS Galvanized Stranded Steel Guy Wire 250 feet
Economical 250 foot length, Perfect for guying down Taller ROHN 25G 45G 55G 65G Towers in both Temporary and Permanent Scenarios, with 11,200 lbs. Breaking Strength...

1/4EHS-5000 is 1/4" EHS Galvanized Stranded Steel Guy Wire 5000 feet
Economical 5000 foot length Reel, Perfect for guying down Taller ROHN 25G 45G 55G 65G Towers in both Temporary and Permanent Scenarios, with 6,000 lbs. Breaking Strength...

5/16EHS-500 is 5/16" EHS Galvanized Stranded Steel Guy Wire 500 feet
Economical 500 foot length, Perfect for guying down Taller ROHN 25G 45G 55G 65G Towers in both Temporary and Permanent Scenarios, with 11,200 lbs. Breaking Strength...

5/16EHS-1000 is 5/16" EHS Galvanized Stranded Steel Guy Wire 1000 feet
Economical 1000 foot length, Perfect for guying down Taller ROHN 25G 45G 55G 65G Towers in both Temporary and Permanent Scenarios, with 11,200 lbs. Breaking Strength...

5/16EHS-5000 is 5/16" EHS Galvanized Stranded Steel Guy Wire 5000 feet
5,000 foot length, Perfect for guying down Taller ROHN 25G 45G 55G 65G Towers in both Temporary and Permanent Scenarios, with 11,200 lbs. Breaking Strength...

3/8EHS-250 is 3/8" EHS Galvanized Stranded Steel Guy Wire 250 feet

Economical 250 foot length Reel, Perfect for guying down Taller ROHN  55G 65G Rohn 80 Towers in both Temporary and Permanent Scenarios, with 15,400 lbs. Breaking Strength...

3/8EHS-500 is 3/8" EHS Galvanized Stranded Steel Guy Wire 500 feet

Economical 500 foot length Reel, Perfect for guying down Taller ROHN  55G 65G Rohn 80 Towers in both Temporary and Permanent Scenarios, with 15,400 lbs. Breaking Strength...

3/8EHS-5000 is 3/8" EHS Galvanized Stranded Steel Guy Wire 5000 feet

Economical 5000 foot length Reel, Perfect for guying down Taller ROHN  55G 65G Rohn 80 Towers in both Temporary and Permanent Scenarios, with 15,400 lbs. Breaking Strength...

Down Guy Wire Kit for up to 2-1/4" Mast
Made in the USA!
Complete kit for guying down a mast pole up to 2.25" diameter. Includes guy wire, guy ring, S hooks, turnbuckles and tiller clamps. Mast not included.

Guy Wire Kit for Non Pen Mounts up to 2-1/4"
Made in the USA!
Complete kit for guying down a mast up to 2.25" diameter. Includes guy wire, guy ring, S hooks, turnbuckles and cable clamps. Mast not included.

Guy Wire Kit for Tripod Mounts up to 2-1/4"
Made in the USA!
Complete kit for guying down a mast up to 2.25" diameter. Includes guy wire, guy ring, S hooks, turnbuckles and cable clamps. Mast not included.

3S 620  Steel Antenna Mast Down Guy Wire
Made in the USA!
1000 feet of 6 Strand, 20 Gauge Steel Antenna Mast Down Guy Wire for Light Duty Antenna Mast Guying. Comes as Twenty 50 foot Hank Sections in contiguous footage totaling 1000 feet...

CH-GWKIT Universal Down Guy Wire Kit 

Complete kit for guying down a mast pole , christmas trees . Includes guy wire, Spring hooks, Cable clamps. Mast not included.

17A01 3/16" Guy Strain Ceramic Insulator 

Guy Line Insulators are used to divide guy wires into non-resonant sections. This prevents the guy lines from altering the antenna's radiation pattern due to near-field interaction...

17B01 1/4" Guy Strain Ceramic Insulator 10,000 lbs

Guy Line Insulators are used to divide guy wires into non-resonant sections. This prevents the guy lines from altering the antenna's radiation pattern due to near-field interaction...

17C01 5/16" Guy Strain Ceramic Insulator 12,000 lbs

Guy Line Insulators are used to divide guy wires into non-resonant sections. This prevents the guy lines from altering the antenna's radiation pattern due to near-field interaction...

EZ30 30 inch Telescopic Mast Down Guy Screw Anchor
Made in the USA!
30" long Screw Anchor HDG for attaching down guy wire when Guying ROHN H20, H30 and Channel Master 1620, 1630, 1820, 1830 Telescopic Masts, HDG, 7/16" Rod with 4" Helix...

EZ48 4 Foot Telescopic Mast Down Guy Screw Anchor
Made in the USA!
48" long Screw Anchor HDG  for attaching down guy wire when Guying ROHN H50, H40, H30, H20 and Channel Master 1620, 1630, 1640, 1650, 1820, 1830, 1840, 1850 Telescopic Masts, HDG, 5/8" Rod with 6" Helix...

J6526WCA 3/4" x 66" Anchor Rod 

 

anchor No Wrench Thimbleye anchor can be installed by hand or machine . Hot Dipped Galvanized

Q Span Clamp

Used on Mid-span drop wire take-offs

SI-0969 Messenger Drop Clamp

Used to support messenger drop cable between the pole, mid-span and house

EZ 62A 1" Guy Wire Cover
Made in the USA!
Corrugated Loom Tubing Slit, 1" (25.4mm) x 7 feet, Yellow UV
Slit Corrugated Loom Tubing is offered for applications where Spiral Wrap or Braided Expandable Sleeving may be difficult to install or they do not offer the amount of protection required.

PLP 115-Guy Guard Down Guy Marker Yellow Plastic
PLP Guy Markers (Guy Guards) are made of high impact UV stabilized plastic and provides durable, high impact, economical protection for exposed utility pole guy wires, dead end fittings, and anchor rods. Measures 1-1/2" X 8'.

3S 70-7YTIE Round Yellow Guy Marker Plastic 
3 Star Guy Markers (Guy Guards) are made of high impact UV stabilized plastic and provides durable, high impact, economical protection for exposed utility pole & Tower  guy wires, dead end fittings, and anchor rods. Measures 1-1/4" X 8' with Helical Pigtail ...

EZ 29-24 4" Stand-off, Deluxe "Y" TV Antenna Mast Chimney Mount
Made in the USA!
with 12 Feet of Galvanized Straps to Wrap around Chimney (Mast Not Included)...

EZ 29-24S 4" Stand-off, Deluxe "Y" TV Antenna Mast Chimney Mount
Made in the USA!
with 12 Feet of Stainless Steel Straps to Wrap around Chimney (Mast Not Included)...

EZ 29-36S 4" Stand-off, Deluxe "Y" TV Antenna Mast Chimney Mount
Made in the USA!
with 18 Feet of Galvanized Straps to Wrap around Chimney (Mast Not Included)...

EZ 29-36 4" Stand-off, Deluxe "Y" TV Antenna Mast Chimney Mount
Made in the USA!
with 18 Feet of Galvanized Straps to Wrap around Chimney (Mast Not Included)...

EZ 29-48S 4" Stand-off, Deluxe "Y" TV Antenna Mast Chimney Mount
Made in the USA!
with 24 Feet of Galvanized Straps to Wrap around Chimney (Mast Not Included)...

EZ 28-24S "Z" Chimney Mount - Stainless Steel
Made in the USA!
with 12 Feet of Stainless Steel Straps to Wrap around Chimney (Mast Not Included)...

EZ 28-24 "Z" Chimney Mount - Galvanized
Made in the USA!
with 12 Feet of Galvanized Straps to Wrap around Chimney (Mast Not Included)...

EZ 28-36 "Z" Chimney Mount - Galvanized
Made in the USA!
with 18 Feet of Galvanized Straps to Wrap around Chimney (Mast Not Included)...

EZ 28-36S "Z" Chimney Mount - Stainless Steel
Made in the USA!
with 18 Feet of Stainless Steel Straps to Wrap around Chimney (Mast Not Included)...

SKY 6027 Y Type Chimney Mount For TV Antenna Mast
with 18 Feet of Stainless Steel Straps to Wrap around Chimney (Mast Not Included)...

 

AS-166-125 J Pipe Adapter Sleeve
Kit contains a plastic reducer adapter with 1.66" OD and 1.25" ID, 12 inch long 1.25" Pipe and retaining screw to effectively reduce a 1.66 inch DirecTV or DISH Network Satellite Dish J mount to 1.25" OD Pipe for mounting Off-Air or WiFi Antenna for Wireless Internet...

 

EZ DM 166-2 Universal Dish Mount

Made in the USA!
Dish mount for wall or roof. 1.66" OD in DIA. - 18" long galvanized tube with base - powder coated for added protection. Other mast sizes available. Made in America. 

EasyUp EZ DM 166-2Z Universal Dish Mount

Made in the USA!
Dish Mount with 1.66" mast 18" long - zinc coated. Dish mount for wall or roof. 1.660 - 18" long galvanized tube with zinc plated base. Other mast sizes available. Made in America.

6041 21 inch  "J" Mount for 18" DBS Dish or Off-Air Antenna
Designed for wall or roof mounting most Off-Air Antenna and DirecTV, DISH Network Dishes up to 20" in Diameter...

 DS-3000 Universal Home "J" Dish Off-Air Antenna Mount
Designed for wall or roof mounting most Off-Air Antenna and DirecTV, DISH Network Dishes up to 20" in Diameter...

J-UB U-Bolt Kit to Mount J-mount on Pole

 EZ-31 Adjustable Eave Mount Antenna Mast Bracket

3S- GEM-4060  Eave Mount Antenna Mast Bracket

Used for easy mounting on the eave of a house. Lower Bracket of 16 gauge Hot Dip Galvanized steel, non-adjustable 48 inches. Both the upper and lower brackets are for masts up to 2.25 inches in diameter with clamps, bolts and 2.5 inch lag screws. Mast can pass by lower Bracket for Ground mount installations (Mast Not Included). Will stand-off mast 2.25 inches from surface...

3S 10S240 24" Tall, Attic Mount TV Antenna Bracket with Hardware
This all Aluminum, 1 inch diameter, 24 inch long Mast can Hang or Post from Beams and Rafters for mounting Small HDTV Antennas (All in One, Mast Included)...

3S-32818 Eave Mount Fascia Bracket

 

Mounts satellite dish to the eave of a building or to a fascia board at any angle ......

DIGI1028   "J" Mount with Universal Support Brackets
Designed for wall , flat or roof pitch mounting of most Off-Air Antenna and DirecTV, DISH Network Dishes up to 20" in Diameter...

SKY 25322 Coaxial DataCom Speaker Cable Stripper
An Adjustable Multi-Use Tool for Stripping CAT3, CAT5/5e and CAT6, Speaker, Telephone Cable as well as RG-11, RG-7, RG-6 and RG-59 coaxial cables. Perfect for Installing new premise wiring, adjust for the work at hand and Knock it out...

1098CT Thomas & Betts SNS RG6 RG59 F RCA and BNC Compression Tool
is Designed for Thomas & Betts Snap-n-Seal Series 59 and 6 compression connectors just like the SNSUTL...

SKY LNS5000 Universal F Connector Compression Tool
This Tool has adjustable/interchangeable Plungers, and works on almost any brand of RG59, RG6, RG11, RCA, BNC and F Connectors with Plastic Compression Rings like PPC-EX and EXXL, LRC, Thomas and Betts, Snap N Seal, PCT, Antec Digicon "S"-series, Gilbert Ultraease, Paladin SealTite and Perma Seal...

SKY LNS5082 RG6 RG59 F BNC RCA Connector Compression Tool
This tool allows you to compress Skywalker Signature Series Lock & Seal, Thomas & Betts SNAP-N-SEAL® , Antec Digicon, PPC-EX and EXXL, PCT DRS, Gilbert Ultra Seal, Paladin SealTite, and Perma Seal RG6 RG59 F, BNC, and RCA connectors....