ROHN JRM23810 Non Penetrating Ballast Roof Mount R-JRM23810
ROHN JRM23810 Non-Penetrating Ballast Roof Mount 2.375 in. x 10 ft. Mast
Made in the USA!
Mast Dimensions - 2 inch STD. Pipe (2-3/8 OD) x 120"
The JRM is a Non-Penetrating, 5' square ballast type roof mount supporting a 10 ft pipe mast. The JRM is designed to receive up to 12 standard concrete blocks as ballast. The JRM is used in cellular, PCS, Broadband and other applications. The base mount and mast pipe are Hot dip galvanized for corrosion protection and go together quickly.
ROHN Rubber Mat Layer for JRM Roof Mount R-JRMMAT
- $148.00
ROHN JRMMAT Protective Rubber Mat for JRM Roof Mount
A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 1/8 thick Mat is for placement underneath the Frame of a JRM Non-Penetrating mount, on top of Roof surface...
ROHN Protective Barrier Pad for JRM Roof Mount R-JRMPAD
- $158.00
ROHN JRMPAD Protective Barrier Pad for JRM Roof Mount
A Protective Layer between the Roof Surface and the Non-Penetrating Roof Mount before Installation. This 3/8 thick Pad is for placement underneath the Frame of a JRM Non-Penetrating mount, on top of Roof surface...
Flat Roof Non-Penetrating Mounts
These mounts can be used where penetrating its attachment is not an option. Non penetrating mounts use a balasest like your usual cement cinder block as a method to hold down your masting structure. They can help meet the variety of communication tower needs such as Cellular, PCS, Wireless Cable, Microwave, Wireless Internet, WiFi Hot Spots, DBS, MDS, MMDS and UHF/VHF reception.
Designed and engineered to handle the job of getting above ground interference, each non-penetrating roof mount has been researched and developed to serve a specific purpose.
With professionally engineered construction, you can be assured you're getting a virtually maintenance-free product built to the highest standards. And because our non-penetrating roof mounts are hot-dip galvanized after fabrication, our mounts won't rust.
- Additional Features Include
- Offer both Fixed Mounts and Ballast Roof Mounts
- Pre-Galvanized for corrosion protection
- Varied mast heights available
- Varied mast pipe O.D. available
- Quickly shipped and quickly assembled
- Minimum bolted connections
- Engineering ballast tables available
- Optional roof pads and mats available
- All models are UPS shippable
1.
ROHN JRM23810 Non Penetrating Ballast Roof Mount R-JRM23810
- $532.00
|
2.
Analog TV Channel 4 Signal Combiner SC-4
- $26.00
|
3.
DS-3000 J Pipe Mount for Satellite Dish TV Antenna
- $28.95
|
4.
ROHN RSL Tower Leg for Section 3 | RSLL-R3
- $254.00
|
