VMP AP-1 400mm x 200mm VESA Adaptor Plate Designed Specifically to work with the LCD-2537 and LCD-2537C...
VMP AP-2B 300mm x 300mm VESA Adaptor Plate Designed Specifically to work with the LCD-2537B and LCD-2537CB...
VMP AR-1B Portrait Mounting Rails mounting rails designed to extend the length of the mounting rails of various mounts for portrait mounting or mounting larger vertical hole patterns.
VMP LCD-PA Pole Adaptor Pole adaptor used with the LCD-1 and LCD-2537 to enable these mounts to be attached to a round or square pole.
VMP DS-CH Digital Signage Computer Holder The DS-CH uses tamper resistant hardware to keep a digital signage computer secure. It easily attaches to any wall or ceiling mount in either portrait or landscape positions.
VMP DS-BP FP-LDSB Wall Plate Extension The DS-BP enables the FP-LDSB digital signage mount to be extended to add additional flat panels for video walls.
VMP SCM-1 Suspended Ceiling Mount For use with 2 x 2 or 2 x 4 foot ceiling tiles and Standard NPT or VMP Ceiling Masts...
VMP TT-13 Small Television & LCD Monitor Turntable With a Platform Width of 15 inches, a Depth of 12 inches and a Load capacity of 60 lbs...
VMP TR-36 36 Inch Roof Mount Tripod for Antenna Mast Tripod holds mast up to 1.75 inch OD, includes a pitch pad kit, a universal mast clamp and has installer friendly front facing feet that line up 16 inches center to outer legs...
VMP TR-60 60 Inch Roof Mount Tripod for Antenna Mast Tripod holds mast up to 2.00 inch O.D., includes a pitch pad kit, a universal mast clamp and has installer friendly front facing feet with outer legs lining up at 48 inches (3 x 16) and the center leg at 24 inches from either outer leg...
19" Headend Equipment Rack - 71" Height The ER-1 is an EIA compliant, 19-Inch headend steel constructed equipment rack with a rail height of 71" and 40 available rack spaces.
19" Headend Equipment Rack - 48" Height The ER-148 is an EIA compliant, 19-Inch headend steel constructed equipment rack with a rail height of 48" and 27 available rack spaces.
19" Headend Equipment Rack - 84" Height The ER-184 is an EIA compliant, 19-Inch headend steel constructed equipment rack with a rail height of 84" and 46 available rack spaces.
Swing Gate Wall Rack - 24" Height The ER-W24 is an EIA compliant, 13 rack space, 19" steel and aluminum wall mounted equipment rack with a 24-inch rail height and a 100 lbs load capacity.
2U blank panel (3.5
8U blank panel (14
4U blank panel (7
Economy Rack Shelf The ER-S1 is a two space economy rack shelf. It has a heavy load capacity and includes two sets of mounting screws.
The Video Mount Products Two Fan Kit is designed for use in EREN series floor enclosures. It features two fans on a single tray that are wired to a common plug.
D-Ring Cable Manager - 1 Space The ER-DRCM1 can be easily mounted to any rack to manage all types and sizes of wire and cable.
Hinged Wall Bracket - 2 Space The ER-HWB2 is a single spaced, hinged wall bracket that can be mounted to a rack or directly to a wall. Easy to use and allows access to the back of the panel.
Hinged Wall Bracket - 1 Space The ER-HWB1 is a single spaced, hinged wall bracket that can be mounted to a rack or directly to a wall. Easy to use and allows access to the back of the panel.
Rack Mounted Sliding Shelf - 1 Space The ER-SS1U is a one rack space sliding shelf. Useful for keyboards or other equipment that needs to be pulled out for use, but tucked away when not in use. Both #10-32 and #12-24 screws are included to work with a wide variety of equipment racks.
Two Space Rack Shelf The ER-S2UV is a vented two space rack shelf that can store components up to 17.375" wide and 14.75" deep. It has a load capacity of 50 lbs and includes both #10-32 and #12-24 rack screws to attach the shelf.
Two Space Rack Shelf The ER-S2U is a two space rack shelf that can store components up to 17.375" wide and 14.75" deep. It has a load capacity of 50 lbs and includes both #10-32 and #12-24 rack screws to attach the shelf.
Vented One Space Rack Shelf The ER-S1UV is a vented one space rack shelf that can store components up to 17.375" wide and 14.75" deep. It has a load capacity of 50 lbs. and includes both #10-32 and #12-24 rack screws to attach the shelf.
Economy Rack Shelf The ER-S1V is a vented two space rack shelf that can store components up to 17" wide and 12.5" deep. It has a load capacity of 40 lbs. and includes both #10-32 and #12-24 rack screws to attach the shelf.
D-Ring Cable Manager - 2 Space The ER-DRCM2 can be easily mounted to any rack to manage all types and sizes of wire and cable.
Rack Casters ER-CASTERS - A set of four heavy duty casters that can easily attach to most VMP racks.
Works for both floor and wall enclosures (EREN series and ERWEN series)Keyed the same as the front and back locks for ERWEN series wall enclosuresSecures side panels from being openedComes with two keys
Video Mount Products ER-RS1032-50 Rack Screws
(50 count each Order)...
Video Mount Products ER-RS1032-100 Rack Screws
(100 count each Order)...
VMP ER-LCD1017 Monitor Rack Mountcan hold most 10" to 17" flat panels on an equipment rack. It can also accommodate up to a 23" monitor by inverting the mount on the rack. The ER-LCD1017 has a static resistant powder coat finish and includes two types of rack screws.
1U Blank Panel (1.75
Comes with adjustable four post rails, a removable hinged wall plate and a reversible tempered glass front door
19" Hinged Wall Equipment Rack Enclosure - 12 Spaces Beautiful and strong, the ERWEN-12E is a workhorse of a wall mounted rack enclosure. With adjustable four post rails, removable hinged wall plate and a reversible glass front door the ERWEN-12E has all the features installers are looking for.
Beautiful and strong, the ERWEN-15E is a workhorse of a wall mounted enclosure. With adjustable four post rails, removable hinged wall plate and a reversible glass front door the ERWEN-15E has all the features installers are looking for.
19" Equipment Rack Enclosure - 18 Spaces The EREN-18E is the first in VMP's new line of equipment rack enclosures. Fully assembled and welded these units simplify on site installation. This is an empty unit.
19" Equipment Rack Enclosure - 18 Spaces The EREN-18 is the first in VMP's new line of equipment rack enclosures. Fully assembled and welded these units simplify on site installation. Preloaded with shelves, blanks and fans the EREN-18 comes out of the box ready for your equipment.
19" Equipment Rack Enclosure - 27 Spaces The EREN-27 is the first in VMP's new line of equipment rack enclosures. Fully assembled and welded these units simplify on site installation. Preloaded with shelves, blanks and fans the EREN-27 comes out of the box ready for your equipment.
19" Equipment Rack Enclosure - 42 Spaces The EREN-42 is the first in VMP's new line of equipment rack enclosures. Fully assembled and welded these units simplify on site installation. Preloaded with shelves, blanks and fans the EREN-42 comes out of the box ready for your equipment.
EREN-42E1K 19" Equipment Rack Enclosure 42U 1000 mm Depth
Works with all standard 19" rack equipment and accessories. Overall dimensions: 78.2" (81.1"H with provided casters) x 23.6"W x 39.4"D with a maximum usable depth of 33"
Virtually limitless number of configurations for the wall or ceiling Full range of tilt, twist and swivel Mounts on back of speaker Load capacity - 12 lbs High impact plastic Black finish Sold in pairs
VMP's full line of residential mounting solutions are not only practical, but look great in any room in the home. Rugged and with 180 degree swivel and twist capability from the wall or the ceiling, the
VMP FRM200 Non-Penetrating Roof Mount with 2.00" O.D. Mast 30" in Length Ideal for DirecTV Slimline, AT9, WildBlue and SuperDISH Dish Mounting, is constructed of steel, uses standard concrete blocks as Ballast...
VMP FRM125 Non-Penetrating Roof Mount with 1.25" O.D. Mast 60" in Length Ideal for Off-Air TV and Wireless Internet Antenna mounting, is constructed of Powder Coated Steel steel, uses standard concrete blocks to anchor...
VMP FRM166 Non-Penetrating Roof Mount with 1.66" O.D. Mast 30" in Length Universal Dish Mount Sized and is constructed of steel, uses standard concrete blocks for Ballast...
VMP FRMA Non-Penetrating Roof Mount FRM200 to FRM238 Adapter Converts the FRM200 2.00 inch OD mast pipe to a 2.375 inch OD Mount ideal for HughesNet, DirecWAY, StarBand Satellite Dish and Microwave Antenna Mounting, is constructed of steel, uses standard concrete blocks as Ballast...
VMP PRM-2 Non-penetrating Satellite Dish Pitched Roof Mount is constructed of Gray Powder Coat Steel and uses standard concrete blocks to anchor with a 6 inch by 9 inch Foot Plate. Larger Plate Dimension than the PRM-1, and accomodates the DirecTV SlimLine Dish Package (Not Included)...
New Store to Open 2024 Three Star Inc. 5750 Stuart Ave. Jacksonville, FL 32254
Your Orders are Currently being Processed and Shipped out of Richmond, VA.